Operating instructions for the safe with an electronic lock
Every modern person wants to create in his home, office the most comfortable conditions for storing personal belongings, jewelry, money. That is why most people install the most secure burglary doors and connect expensive alarms. But in order to keep your documents, papers and other expensive things safe and sound, it is best to pick up and install a safe with an electronic lock.
To correctly install and properly operate the storage system, you must carefully read the instructions for the safe.
What points should you pay special attention to in the instructions for the electronic safe?
In order to always handle the safe with an electronic lock without any problems, it is necessary to study the instructions in detail and pay attention to the following points:
● Recommendations for closing and opening safe doors. In order to carry out the opening process, you must enter a combination of numbers, press the button. Then you can turn the handle and the door will open. Each moment of pressing the button can be accompanied by a yellow indicator, there can also be a sound signal, which is very convenient during operation. The microprocessor will confirm that you are doing everything correctly. If after the process of entering the code nothing happened, the door does not open, then the entered code is incorrect. In the event that the code was entered incorrectly three times, the keyboard will be locked for several minutes. If the numbers are entered incorrectly three times, the system will block the keypad for up to 5-10 minutes.
● Instructions for transcoding an electronic combination lock. It is very important that the installation of a new code and verification of the correctness of its introduction are carried out exclusively with the doors of the safe open. To change the code, press the “1” button until you hear a double beep. Enter a valid code and enter a combination of numbers for another user. After that, you should re-enter the code for another user. Open the door, hold down the “0” button until you hear a double beep, enter the current code, then enter a new one and enter it again. The new code has been installed.
● Adding a second user code. Open the doors, press the “1” button and wait until you hear a double beep. Enter the valid code, then the combination for the second user. Re-enter the code for the second user. After that, the new code will be added.
● Removing the second user. Open the doors, hold down the “3” button until a double signal sounds. Enter the main valid code. After that, the combination of numbers for the second user will be deleted from the system.
In any case, the nuances of operation may differ depending on which particular model of the safe you decide to purchase. But in general, the presented tips and tricks are almost universal.
The device is always closed quickly and without any problems. You just need to close the door and place the handle in its original position.
What other actions with a Griffon safe or another brand is important to carry out exactly in accordance with the instructions?
When using a safe with an electronic lock, you need to take a responsible approach to the process of replacing batteries and always act clearly in accordance with the instructions. If, along with the green light, red began to blink, then it is time to change the batteries. After replacement, check that all elements are installed correctly. Then be sure to check the functionality of the lock while the door is open.
Anyone can choose high-quality safes with an electronic lock. You should choose a model based on your own requirements and wishes, budget. But in general, such designs are suitable both for use in everyday life and in the office, in other conditions. You can mount the product to a horizontal surface: furniture, wall. To do this, the safes must contain special fasteners. If you have any difficulties with the installation, it is better to seek professional help.